服务器 发布日期：2024/11/2 浏览次数：1
一、目的
在使用CentOS6.3版本Linux系统的时候，发现根目录(/)的空间不是很充足，而其他目录空间有很大的空闲，所以本文主要是针对现在已有的空间进行调整。首先，先来查看一下系统的空间分配情况：
[root@CentOS-78 /]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_centos-lv_root
50G 14G 34G 30% /
tmpfs 1.9G 0 1.9G 0% /dev/shm
/dev/sda1 485M 37M 423M 8% /boot
/dev/mapper/vg_centos-lv_home
404G 670M 382G 1% /home
下面的详细步骤部分将从vg_centos-lv_home分区下取出100G的空间添加到/vg_centos-lv_root分区上去。
二、详细步骤
1、卸载vg_centos-lv_home分区
[root@CentOS-78 /]# umount /home
此时在用df命令查看将会发现/home目录已经看不见了，如下所示：
[root@CentOS-78 /]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_centos-lv_root
50G 14G 34G 30% /
tmpfs 1.9G 0 1.9G 0% /dev/shm
/dev/sda1 485M 37M 423M 8% /boot
2、从新设定vg_home-lv_home的大小
[root@CentOS-78 /]# resize2fs -p /dev/mapper/vg_centos-lv_home 282G resize2fs 1.41.12 (17-May-2010) Please run 'e2fsck -f /dev/mapper/vg_centos-lv_home' first.
这一步设定vg_home-lv_home大小没有成功，系统提示我们先运行下面的命令，操作如下：
[root@CentOS-78 /]# e2fsck -f /dev/mapper/vg_centos-lv_home e2fsck 1.41.12 (17-May-2010) Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information /dev/mapper/vg_centos-lv_home: 1386/26836992 files (0.9% non-contiguous), 1855856/107344896 blocks
从新设定vg_home-lv_home的大小：
[root@CentOS-78 /]# resize2fs -p /dev/mapper/vg_centos-lv_home 282G resize2fs 1.41.12 (17-May-2010) Resizing the filesystem on /dev/mapper/vg_centos-lv_home to 73924608 (4k) blocks. Begin pass 2 (max = 43) Relocating blocks XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Begin pass 3 (max = 3276) Scanning inode table XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Begin pass 4 (max = 266) Updating inode references XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX The filesystem on /dev/mapper/vg_centos-lv_home is now 73924608 blocks long.
检查是否成功：
[root@CentOS-78 /]# mount /home
[root@CentOS-78 /]#
[root@CentOS-78 /]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_centos-lv_root
50G 14G 34G 30% /
tmpfs 1.9G 0 1.9G 0% /dev/shm
/dev/sda1 485M 37M 423M 8% /boot
/dev/mapper/vg_centos-lv_home
278G 663M 263G 1% /home
[root@CentOS-78 /]#
3、将lv_home逻辑分区减小到指定大小
[root@CentOS-78 /]# lvreduce -L 282G /dev/mapper/vg_centos-lv_home WARNING: Reducing active and open logical volume to 282.00 GiB THIS MAY DESTROY YOUR DATA (filesystem etc.) Do you really want to reduce lv_home"htmlcode">[root@CentOS-78 /]# vgdisplay --- Volume group --- VG Name vg_centos System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 5 VG Access read/write VG Status resizable MAX LV 0 Cur LV 3 Open LV 3 Max PV 0 Cur PV 1 Act PV 1 VG Size 465.27 GiB PE Size 4.00 MiB Total PE 119109 Alloc PE / Size 86472 / 337.78 GiB Free PE / Size 32637 / 127.49 GiB VG UUID 1k4ooN-RFV9-uyf1-uMYf-aERG-YaGs-ZNoSD6Free PE / Size指定的应该是现在可在分配的空间。
4、增加vg_centos-lv_root分区的大小
将可用的空间添加到vg_centos-lv_root分区上面：
[root@CentOS-78 /]# lvextend -L +127.40G /dev/mapper/vg_centos-lv_root Rounding up size to full physical extent 127.40 GiB Extending logical volume lv_root to 177.40 GiB Logical volume lv_root successfully resized [root@CentOS-78 /]#从新设定该分区的大小：
[root@CentOS-78 /]# resize2fs -p /dev/mapper/vg_centos-lv_root resize2fs 1.41.12 (17-May-2010) Filesystem at /dev/mapper/vg_centos-lv_root is mounted on /; on-line resizing required old desc_blocks = 4, new_desc_blocks = 12 Performing an on-line resize of /dev/mapper/vg_centos-lv_root to 46504960 (4k) blocks. The filesystem on /dev/mapper/vg_centos-lv_root is now 46504960 blocks long.5、再次查看分区大小
[root@CentOS-78 /]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_centos-lv_root 175G 14G 153G 9% / tmpfs 1.9G 0 1.9G 0% /dev/shm /dev/sda1 485M 37M 423M 8% /boot /dev/mapper/vg_centos-lv_home 278G 663M 263G 1% /home我们发现vg_centos-lv_root分区的空间已经增加了125G，之所以比lv_home减少的空间要多25G主要是由于我们把系统所有的可用的空间都加在了lv_root分区。
三、所遇到的问题
1、在卸载/home目录的时候失败
可先执行如下fuser命令，然后再umount即可：
[root@CentOS-78 /]# fuser -m /home [root@CentOS-78 /]#2、设定完lv_home的大小，再次mount该分区时，发现用df命令无法看到给分区，此时只要在mount一次即可
3、在设定lv_root的大小时，不要把Free PE / Size的空间全部都用上，这很可能会出现Free PE空间不足的现象，建议保留一点Free PE的空间。
以上就是本文的全部内容，希望对大家的学习有所帮助，也希望大家多多支持。